4.2 INSTALLATION PROCEDURE
CAUTION
Unplug the copier power cord before starting the following procedure.
NOTE: Keep the shipping retainers after installing the machine. They will be
reused if the machine is transported to another location. Proper
reinstallation of the shipping retainers is required in order to avoid
any transport damage.
1. Remove the strips of tape.
2. Remove the bottom plate stopper [A].
NOTE: One bottom plate stopper is located in each tray.
[A]
Installation
Procedure
PAPER TRAY UNIT (A549/A550) INSTALLATION
SM 3-41 A166/A187/A189
To Next Page
Loading...
