UP-5 Operation Mode Settings
No.:
Function
name
Description
Choices (range) and
specification method
1: Auto
Reset
Changes the time after which the copier resets itself.
You can also turn off this function.
Enter a value in the
range of 10 to 900
seconds.
2: Stand-by Specifies whether the copier enters the Stand-by
condition at the same time as the Auto Reset
function is executed.
3: Beeper The beeper can be set to on or off.
4: Set User
R/E
You can store up to 2 frequently used
magnifications other than the fixed magnifications.
You can also change a stored magnification.
If you enter ā0,ā this function remains undefined.
Enter a value in the
range of 25 to 400% (in
1% steps).
Default = 100%
5: Counter
(count
up/count
down)
Specifies whether the copy counter shows the
number of copies made so far or the number of
copies remaining to be made.
R
If you make copies at a specified magnification,
use the
Enlarge
or
Reduce
key to select it.
6: Max.
Copy
Quantity
Changes the maximum number of copies that can
be made consecutively.
Enter a value in the
range of 1 to 99.
1On
2Off
1On
2Off
1On
2Off
1 Ratio 1
2 Ratio 2
1 Count up
2 Down
99 sheets
60 seconds
Service
Tables
USER PROGRAM MODES
SM 4-25 A166/A187/A189
To Next Page
Loading...
