Duplexing:
Basic Manual Duplex
Model (A166):
Manual Duplexing in full color and Single
Color mode
Basic Auto Duplex
Model (A187):
Manual & Auto Duplexing in Full Color and
Single Color mode
Edit Auto Duplex Model
(A189):
Manual & Auto Duplexing in Full Color and
Single Color mode
Duplex can be done on 64-104 g/m
2
(17-28lb
bond) paper.
Manual Duplexing can be done through the
By-pass table only, and the user should press
the Duplex Side 2 key before copying the
reverse side.
Non-Reproduction Area:
Leading Edge:
0.2"
±
0.08" (5 mm
±
2 mm)
Side:
0.08"
±
0.08" (2 mm
±
2 mm)/
Total less than 0.16" (4 mm)
Trailing Edge
Front side 2.5 mm
±
2.0 mm
Back side 6.0
±
2.0 mm
(back side trailing edge is adjustable by SP
mode from 0.5 to 10 mm)
Copy Number Input: Number keys, 1 to 99
Copy Number Input
(Auto Duplex):
Number keys
Single Color - 1 to 50: smaller than A3, 11" x 17"
1 to 30: A3, 11" x17"
Full Color 1 to 20: all sizes
Image Density: Auto/Manual (7 steps)
Automatic Reset: Yes (10 to 900 seconds or Off)
Paper Capacity: Tray:
250 sheets x 1 tray
(Basic Manual Duplex Model: A166)
By-pass:
40 sheets Normal paper (80 g/m
2
)
20 sheets OHP
1 sheet Adhesive paper
SPECIFICATIONS
A166/A187/A189 1-4 SM
To Next Page
Loading...
