ng
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
873
CTL
B
HDD mail send data error
An error is detected on the HDD immediately after the machine has
been turned on, or power has been turned off while the machine has
used the HDD.
ï‚§ Defective HDD
ï‚§ Power failure during an access to the HDD
1. Do SP5832-008 (Format HDD – Mail TX Data) to initialize the HDD.
2. Replace the HDD.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
874 CTL
Delete All error 1: Data area
An error occurs while the machine deletes data from the HDD.
Note:
The source of this error is the DataOverwriteSecurity Unit running from
an SD card.
ï‚§ An error detected at the delete program.
ï‚§ Delete All option is not installed.
1. Turn the main switch off/on and try the operation again.
-05 D Read error
-06 D Write error
-09 D No response from HDD
-10 D Kernel
-12 D No specification for partition
-13 D No device file
-14 D Startup option error
-15 D No specification for sector number