OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 301
4. Enter ring plan class of service (e.g., 05)
OR
[205] STN COS
1:05 2:01 3:01
Use UP and DOWN to scroll through classes
of service and press RIGHT soft key to
advance to the next ring plan
OR
Use UP and DOWN to scroll through classes
of service and press LEFT soft key to return
to step 2.
5. Enter the next ring plan class of service
(e.g., 05)
[205] STN COS
1:05 2:01 3:01
OR
Use UP and DOWN to scroll through classes
of service and press RIGHT soft key to move
cursor to the next ring plan
OR
Use UP and DOWN to scroll through classes
of service and press LEFT soft key to return
to previous step.
6. Press TRANSFER to save and exit
OR
Press SPEAKER to save and advance to next
MMC.
DEFAULT DATA: RING PLANS 1-6 = 01
RELATED ITEMS: MMC 701 ASSIGN COS CONTENTS
MMC 507 ASSIGN RING PLAN TIME
MMC 217 SECONDARY STATION
To Next Page
Loading...
