OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 205 ASSIGN LOUD BELL
DESCRIPTION:
This MMC is used to pair a station with an audible tone output from the MISC PORT.
The MISC PORT loud bell output may be assigned to one station. The default
directory number is not assigned for Loud Bell.
Only a station directory number can be assigned. Station groups are not permitted.
The audio ring tone is fixed and can not be changed.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Clears previous entry
ACTION DISPLAY
1. Press TRANSFER 205
Display shows current setting
[205] LOUD BELL
NO LOUD BELL
2. Dial loud bell number (e.g., 362)
[362] LOUD BELL
RING PAIR : NONE
3. Enter station number (e.g., 201)
OR
[362] LOUD BELL
RING PAIR :201
Press UP or DOWN key to make selection
and press RIGHT soft key to return to step 2.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: UNASSIGNED
RELATED ITEMS: MMC 218 RELAY TYPE
MMC 724 DIAL NUMBERING PLAN
To Next Page
Loading...
