OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 608 ASSIGN REVIEW BLOCK
DESCRIPTION:
Provides means of adding or deleting CID / ANI review blocks to an individual
keyset. With the ability to delete a block or blocks or speed dial, it will not be
necessary to waste these on such items as voice mail, DPIMs or for keysets that do
not have displays. The free list will show how many bins are left to be assigned. A
system has 2500 total bins. Each keyset may be assigned a maximum of 50 bins.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear entry
TRANSFER To exit programming
ACTION DISPLAY
1. Press TRANSFER 608.
Display shows first station.
[201] REVW BLOCK
NONE: 1500 FREE
2. Enter desired EXT number (e.g. 205)
OR
[205] REVW BLOCK
NONE: 1500 FREE
Press UP or DOWN key to make selection
and press RIGHT soft key to advance cursor.
3. Enter valid number for bins (e.g. 5)
OR
[205] REVW BLOCK
50 : 1450 FREE
Press UP or DOWN key to make selection
OR
Press HOLD key to delete bin(s).
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: STATIONS: 50 BINS
RELATED ITEMS: NONE
To Next Page
Loading...
Need help?
General
