OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 305 ASSIGN FORCED CODE
DESCRIPTION:
This MMC allows only one of the four options to be selected; the assignment of
account code with verification, account code without verification, authorization codes,
or none on a per-station basis or on an all-station basis. The system supports 500
authorization codes and 999 account codes that are verified when account codes
verified is selected. If account codes without verification are selected, then there will
be no table used.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
FEATURE KEYS
0 NONE No Account or Authorization code required (NOT forced
strictly voluntary).
1 AUTHORIZE CODE Forces user to enter a valid four digit Authorization code
listed in AUTHORIZATION CODE. Table (MMC 707).
2 ACCT VERIFIED Forces user to enter a valid account code listed in
ACCOUNT CODE Table (MMC 708).
3 ACCT NO VERIFIED Forces user to enter an account code but this code is NOT
verified. User can make up any code (any account code
up to 12 digits including ∗ and #).
ACTION DISPLAY
1. Press TRANSFER 305
Display shows
[201] FORCD CODE
NONE
2. Dial station number ( e.g., 205)
OR
[205] FORCD CODE
NONE
Press UP or DOWN key to select station and
press RIGHT soft key to move cursor.
To Next Page
Loading...
