OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 313 COPY STATION/TRUNK USE
DESCRIPTION:
This program allows a technician to copy the contents of a station use group or a
trunk use group to a new use group without having to enter all the data again.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 313.
Display shows.
[001] COPY USABLE
FROM:
2. Enter group number (e.g., 005)
OR
[005] COPY USABLE
FROM:
Press UP or DOWN keys to make selection
and press RIGHT soft key to move cursor.
3. Enter group number to copy from
cursor is returned to step 2
[005] COPY USABLE
FROM:003
OR
Press UP or DOWN key to make selection.
4. Press RIGHT soft key to return to step 2
OR
Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to
next MMC.
DEFAULT DATA: NONE
RELATED ITEMS: MMC 304 STATION TRUNK USE
MMC 614 USE GROUP
To Next Page
