OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 MAY 2009
MMC: 408 ASSIGN TRUNK MOH SOURCE
DESCRIPTION:
Allows the system administrator to set MOH tone for each trunk in the system.
Option 1: MOH—this selects the Music On Hold source will be heard on each trunk
when it is put on hold.
Option 2: AA—this selects which Music On Hold or tone source will be heard when
the trunk is automatically answered by the system. See MMC 210-Trunk Auto MOH,
ON/OFF. This feature must be set to ON before the AA option will take effect.
For the three types of selection for Options 1 and 2 see below.
OPTIONS
1. TONE: An intermittent tone is played to the caller.
2. NONE: No Music on Hold selection.
3. 371: MOH is played from External Source or Internal Chime connected to MISC
port.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 408
Display shows current setting
[701 ] TRK MOH
MOH:TONE AA:NONE
2. Dial trunk number (e.g., 704)
OR
[704 ] TRK MOH
MOH:TONE AA:NONE
To Next Page
Loading...
