OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 107 KEY EXTENDER
DESCRIPTION:
Use this program to view the programmable keys assigned to keyset station. In
addition, it allows the system administrator to assign key extenders to some keys
that will make a general access feature key more specific. The feature keys that can
have extenders are listed below.
FEATURE KEY EXTENDER
ACC Account code bin (000–999)
BOSS Boss and Secretary (1–4)
CC Call Coverage
CR Voice Mail Call Record (Mailbox)
CS UCD Call Status (UCD group number)
DIR Directory dial by name type (1–3)
DP Direct Pickup (extension or station group number)
DS Direct Station Select (station number)
DT Direct Trunk
EP Establish Call Pickup
FWRD Call Forward (0–5)
GCONF Group Conference (1–5)
GPIK Group Pickup (01–20)
IG IN/Out of Group (Station Group Number)
MMPG Meet Me Page (0–9, 4)
MS Manual Signaling
MW Message Waiting (extension or station group #)
NPG Network Page
NS Network Station
PAGE Page (0–9, 4)
PARK Park Orbits (0–9)
PMSG Programmed Station Text Messaging (00-20)
RP Ring Plan (1–6)
RSV Room Status View (0–4)—(NOT USED IN USA)
SG Station Group (500–519)
SP UCD Supervisor (UCD group number)
SPD Speed Dial (00–49, 500–999)
TG Trunk Group
VM Voice Mail Memo (extension or station group #)
VT Voice Transfer (VM Station Group Number)
To Next Page
Loading...
