OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 107
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRANSFER 107
Display shows first station
[201] EXTD:KTS
01:CALL1
2. Dial station number (e.g., 205)
OR
[205] EXTD:KTS
01:CALL1
Use UP or DOWN to scroll through
station numbers and press RIGHT
soft key to move the cursor.
3. Press the RIGHT soft key to program the
keyset
[201] EXTD:KTS
01:CALL1
OR
Use UP and DOWN to scroll through the
keyset and AOM’s and use the right soft key
[201] EXTD:AOM1
01:DS
to move the cursor.
4. Enter key number (e.g., 18)
OR
[205] EXTD:KTS
18:DS
Use UP and DOWN to scroll through
keys and use RIGHT soft key to
move the cursor
OR
Press the key to be programmed
Dial extender according to above table.
[205] EXTD:KTS
18:DS 207
System will return to this step
If no more entries, press LEFT soft
key to return to step 2.
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
To Next Page
Loading...
