Samsung OFFICESERV 7100 - MMC: 402 TRUNK DIAL TYPE

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 402 TRUNK DIAL TYPE
DESCRIPTION:
Used to determine the dialling type of each C.O. line. There are two options: DIAL
PULSE (rotary dial) and Dual Tone Multi Frequency (DTMF).
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 402
Display shows
[701] DIAL TYPE
DTMF TYPE
2. Dial trunk number (e.g., 704)
OR
[704] DIAL TYPE
DTMF TYPE
Use UP or DOWN to scroll through trunk
numbers and press RIGHT soft key to move
the cursor
OR
Press ANS/RLS to select ALL.
[ALL] DIAL TYPE
?
3. Dial 1 for PULSE or 0 for DTMF
OR
[704] DIAL TYPE
DIAL PULSE TYPE
Use UP or DOWN to scroll through options
Press RIGHT soft keys to return to step 2.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to
next MMC.
DEFAULT DATA: ALL TRUNKS DTMF
RELATED ITEMS: MMC 501 SYSTEM TIMERS
MMC 503 TRUNK-WIDE TIMERS
Home Page
Table of Contents