OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 422 COST RATE
DESCRIPTION:
In this MMC, the TRUNK COST RATE flags are entered for each trunk. The per trunk
cost rates are defined in MMC 729 Rate Calculation Table. The dialed digits Costing
Plans are defined in MMC 730. Each trunk may be defined with up to eight cost
rates. Enter one or more of the eight COST RATES per trunk. If an entry is left blank,
no call costing will be calculated for that particular DIAL PLAN.
Call type 8 is fixed for incoming. Apply a cost rate under type 8 only to a trunk if you
want incoming call costing.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select all
ACTION DISPLAY
1. Press TRANSFER 422
Display shows trunk number
[701] :12345678
CR :00000000
and Cost Rate table numbers
2. Dial trunk number (e.g., 705)
OR
[705] :12345678
CR :00000000
Press UP or DOWN to select trunk
OR
Press ANS/RLS for all.
Press RIGHT soft key to move cursor.
3. Press UP or DOWN key to move cursor
along the line until the cursor is under
[701] :12345678
CR :01000000
the Cost Rate mark (e.g., 2).
Enter 1 for YES or O for NO and press
RIGHT soft key to return to step 1
OR
4. Press TRANSFER to store and exit.
To Next Page
Loading...
