OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 802 CUSTOMER ACCESS MMC NUMBER
DESCRIPTION:
Allows the System Administrator to have access to certain MMCs. For example, it is
required that the System Administrator customer have access to MMC 102 Call
Forward for call forwarding but it is not required that the System Administrator have
access to MMC 710 LCR Digit Table for LCR dial plans. This MMC is for both
tenants.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ACTION DISPLAY
1. Press TRANSFER 802.
Display shows.
CUST.USE MMC: 1
100:STN LOCK:YES
2. Enter desired tenant number (1–2) via dial
keypad
CUST.USE MMC: 1
100:STN LOCK:YES
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor.
3. Enter desired MMC number via dial keypad
OR
CUST.USE MMC: 1
102:CALL FWD:YES
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor.
4. Enter 1 for YES or 0 for NO via dial keypad
OR
CUST.USE MMC: 1
102:CALL FWD:NO
Press UP or DOWN key to make selection
and press LEFT soft key to return to step 3
to make additional entries.
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: NONE
RELATED ITEMS: NONE
To Next Page
Loading...
