OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 801 CHANGE TECHNICIAN PASSCODE
DESCRIPTION:
Used to change the passcode which allows access to MMC 800 Enable Technician
Program from its current value.
NOTE: The passcode is four characters long. Each character can be digits 0-9. The
current or old passcode is required for this MMC.
PROGRAM KEYS
KEYPAD Used to enter passcodes
SPEAKER Save data and advance to next MMC
ACTION DISPLAY
1. Press TRANSFER 801.
TECH. PASSCODE
NEW CODE:_
2. Enter new passcode.
TECH. PASSCODE
NEW CODE: ∗∗∗∗
3. Enter new passcode again.
TECH. PASSCODE
VERIFY : : ∗∗∗∗
4. If passcode is correct, press RIGHT soft key
to continue and enter desired MMC.
TECH. PASSCODE
VERIFY :SUCCESS
If passcode is incorrect.
TECH. PASSCODE
PASSCODE :FAILURE
System returns to step 2.
TECH. PASSCODE
NEW CODE: : ∗∗∗∗
5. Press TRANSFER to store and exit
OR
Press SPEAKER to advance to MMC.
DEFAULT DATA: DEFAULT PASSCODE = 4321
RELATED ITEMS: MMC 800 ENABLE TECHNICIAN PROGRAM
To Next Page
Loading...
