Samsung OFFICESERV 7100 - MMC: 202 CHANGE FEATURE PASSCODE

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 202 CHANGE FEATURE PASSCODE
DESCRIPTION:
Used to change the passcodes for the following features: RING PLAN, DISA ALARM,
ALARM CLR, AA RECORD, DELETE, and WLI REGIST.
DIAL OPTION DESCRIPTION
0 RING PLAN This is the passcode required to place the system in
different ring plans (RP) or change the ring time
override (RTO).
1 DISA ALARM This is the passcode required to clear a DISA ALARM
generated when the number of DISA attempts are
exceeded.
2 ALARM CLR This is the passcode required to clear an alarm
sensor.
3 AA RECORD NOT USED. This item will be removed in the future
from the OfficeServ 7100 software.
4 DELETE Hotel / Motel feature passcode, required to delete
entries from a guest or meeting room bill (NOT USED
IN THE USA).
5 WLAN This is the passcode to allow mobile stations to
register to the WLI card.
NOTE: The passcode is four digits long. Each digit can be 0-9.
PROGRAM KEYS
KEYPAD Used to enter passcodes
SPEAKER Save data and advance to next MMC
ACTION DISPLAY
1. Press TRANSFER 202
Display shows
CHANGE PASSCODE
RING PLAN :0000
Home Page
Table of Contents