OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 406 TRUNK RING ASSIGNMENT
DESCRIPTION:
Enables ringing to a specific station or to a group of stations when incoming calls
are received. This MMC controls ring plan destinations for ring down trunks. If the
ring plan destinations are not input the default ring plan is ring plan 1. Station group
500 is default in Ring Plan 1. (In a networked system this MMC can be used to
assign ringing to any station or station group in the entire network).
DEVICE DEFAULT DN
3 Digit Station 201–2xx, 301–3xx
3 Digit Station group 500–5xx
4 Digit Station 2001–20xx
4 Digit Station group 5000–5xxx
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL (trunks only)
ACTION DISPLAY
1. Press TRANSFER 406
Display shows
[701] TRK RING
1:500 2:500
2. Use UP or DOWN to scroll through trunk
numbers and press the RIGHT soft key to
[All] TRK RING
1:500 2:500
move the cursor OR press ANS/RLS for ALL
OR
3. Dial trunk number (e.g., 704).
[704] TRK RING
1:500 2:500
4. Dial ring plan number or press the RIGHT
softkey to move to the next step.
[704] TRK RING
1:500 2:500
To Next Page
Loading...
Need help?
General
