OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 5 APRIL 2007
5.1.1
PART 5. AUTOMATED ATTENDANT
PROGRAMMING PROCEDURES
5.1 ACCESSING TUI PROGRAMMING
To access the telephone user administration programming interface the technician
must call in to the main system greeting. This will typically be the Day Main Menu. If the
"enter your password" prompt is played when dialing the automated attendant, escape
to the main menu by pressing "*"
While listening to the menu prompting, press "#" followed by 3 zeros. Note that if the
"Maximum Caller Entry Digits" field of the MENU BLOCK has been changed, the
number of zeros entered must correspond. For example, if "Maximum Caller Entry
Digits" is set to 6, it will require that "#" and 6 zeros be entered.
This will request access to the administration interface. When successful, an "enter your
password" prompt will be played. This password is the "System Admin" password set
on the SYSTEM PARAMETERS screen. The default is "0000". Once administration has
been accessed, the system will play all of the available options.
To record or edit system prompts press 1 and follow the spoken instructions.
To change the current Operating Mode press 3 and follow the spoken instructions. Any
available MODE BLOCK may be selected. This will override the SCHEDULE TABLE
entirely until reset.
To Next Page
Loading...
