OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 403 TRUNK TOLL CLASS
DESCRIPTION:
Assigns toll class level assignments on a per-trunk or all-trunk basis on a time
based ring plan time assignment defined in MMC 507 Assign Ring Plan Time. The
options for toll level will follow the either station class or the class of service defined
in MMCs 702 Toll Deny Table and 703 Toll Allowance Table. The toll classes that
are available are listed below with their entry numbers.
ENTRY NUMBER CLASS TYPE DESCRIPTION
0 F-STN Follow station toll restriction
1 CLS-A Class A Unrestricted
2 CLS-B Follow toll class B
3 CLS-C Follow toll class C
4 CLS-D Follow toll class D
5 CLS-E Follow toll class E
6 CLS-F Follow toll class F
7 CLS-G Follow toll class G
8 CLS-H Class H Restricted
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 403
Display shows
[701] TOLL CLASS
1:F-STN 2:F-STN
2. Dial trunk number
OR
[704] TOLL CLASS
1:F-STN 2:F-STN
Use UP or DOWN to scroll through trunk
numbers and press RIGHT soft key to move
the cursor
OR
Press ANS/RLS to select ALL.
[ALL] TOLL CLASS
1:F-STN 2:F-STN
To Next Page
Loading...
