OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 711 LCR TIME TABLE
DESCRIPTION:
This table gives the flexibility to the system, through the LCR ROUTES, to allow calls
placed at any given time of day to use the least cost trunk route that is available.
When LCR ROUTE ADVANCE is allowed, it is possible for calls to be placed on more
expensive trunks on any given time of day. There are four possible time entries per
day; the start time of the next time period is the end time of the previous time period.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
FEATURE KEYS
DAY VALUE TIME BAND LCRT
SUN 0 A 0 LCRRT 1
MON 1 B 1 LCRRT 2
TUE 2 C 2 LCRRT 3
WED 3 D 3 LCRRT 4
THU 4
FRI 5
SAT 6
ACTION DISPLAY
1. Press TRANSFER 711.
Display shows.
LCR TIME (SUN:A)
HHMM: LCRT:-
2. Dial day of week (SUN-SAT, e.g., WED)
OR
LCR TIME (WED:A)
HHMM: LCRT:-
Press UP or DOWN to make day selection
and press RIGHT soft key.
To Next Page
Loading...
