OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 320 SET BRANCH GROUP
DESCRIPTION:
This program allows the technician to program branch group for each station. Each
station can be in only one branch group. Branch groups enable the user to pick up
the incoming call of another station in the same branch group just by lifting the
handset. There are a maximum of 20 branch groups.
PROGRAM KEYS
UP & DOWN Used to scroll through options/move cursor left or right
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRANSFER 320
Display shows
[201] BRANCH GRP
BRANCH GRP:NONE
2. Press the station number (e.g. 205)
OR
[205] BRANCH GRP
BRANCH GRP:NONE
Press VOLUME to select the station, and press the
RIGHT soft button to move the cursor
OR
Press MESSAGE to set the entire stations.
[ALL] BRANCH GRP
BRANCH GRP:??
3. Enter the branch group number ([01]-[20])
OR
[205] BRANCH GRP
BRANCH GRP:10
Press VOLUME to select pick-up group number,
and press the RIGHT soft button to repeat this
procedure from step 2.
4. Press TRANSFER to exit the program
OR
Press SPEAKER to move on to the next program.
DEFAULT DATA: BRANCH GRP: NONE
RELATED ITEMS: NONE
To Next Page
Loading...
Need help?
General
