OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 703 TOLL ALLOWANCE TABLE
DESCRIPTION:
Provides a way to make toll restriction very easy and flexible. There are 500 entries in
the allow table and each entry index can be assigned to a class of service. Each index
can have up to 12 digits. With the use of wild cards (MMC 704 Assign Wild Character),
more flexibility can be built into toll restriction. There are six toll levels, B to G, that are
programmable. Toll level A is set as unrestricted by default, and toll level H is set as
in-house only by default.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
WILD CARD KEY
DIAL WILD CARD
A X
B Y
C Z
ACTION DISPLAY
1. Press TRANSFER 703.
Display shows.
ALOW(001):BCDEFG
:000000
2. Dial in index number 001-500 (e.g., 005)
OR
ALOW(005):BCDEFG
:000000
Press UP or DOWN key to select index and
press RIGHT soft key to move cursor and
enter toll pattern via dial pad (e.g., 212)
OR
ALOW(005):BCDEFG
212 :000000
Enter wild card (e.g., 21X) from above list
and press RIGHT soft key to move cursor to
COS options.
ALOW(005):BCDEFG
21X :000000
To Next Page
Loading...
