OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 401 C.O./PBX LINE
DESCRIPTION:
Used to select the mode of the C.O. line. If the PBX mode is chosen, this allows PBX
access codes to be recognized, thus allowing more complete toll restriction (call
barring). This mode is assigned on a per-trunk basis.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 401
Display shows
[701] PBX LINE
CO LINE
2. Dial trunk number (e.g., 704)
OR
[704] PBX LINE
CO LINE
Use UP or DOWN to scroll through trunk
numbers and press RIGHT soft key to move
OR
[ALL] PBX LINE
?
Press ANS/RLS to select ALL.
3. Dial 1 for PBX or 0 for C.O.
OR
[704] PBX LINE
PBX LINE
Use UP or DOWN to scroll through options
Press RIGHT soft key to return to step 2.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to
next MMC.
DEFAULT DATA: ALL TRUNKS C.O. LINE
RELATED ITEMS: NONE
To Next Page
Loading...
