OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 418 TRUNK GAIN CONTROL
DESCRIPTION:
Allows loss levels for digital trunks to be adjusted on a per trunk basis. There are
two adjustments available in this MMC. ”TX” is the transmit level adjustment of the
trunk to the station. “RX” is the receive level adjustment of the station to the trunk.
Caution!! This MMC is not to correct low volume. To be used with the support of
STA Technical Support Department.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 418
Display shows
[701] TRK GAIN
RX:+0.0 TX:+0.0
2. Enter desired trunk number (e.g., 705)
via the dial pad
[705] TRK GAIN
RX:+0.0 TX:+0.0
OR
Press UP or DOWN key to make selection
Press RIGHT soft key to move cursor.
[705] TRK GAIN
RX:+0.0 TX:+0.0
Press UP or DOWN key to make selection
Press RIGHT soft key to move cursor.
[705] TRK GAIN
RX:+0.0 TX:+0.0
3. Press UP or DOWN key to make selection.
Press RIGHT soft key to move cursor.
[701] TRK GAIN
RX:+0.0 TX:-2.5
Press RIGHT soft key to move cursor and
return to Step 1.
4. Press ANS/RLS key to select ALL.
[ALL] TRK GAIN
RX:+0.0 TX:+0.0
To Next Page
Loading...
