OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 JANUARY 2009
MMC: 811 RESET SYSTEM
DESCRIPTION:
Provides three methods of restarting the system. The first method restarts the
system and clears all memory. The second method (fast restart) restarts the system
only. The third method restarts the system but does not reload the software from the
media card. If clear all memory is selected, only the default data will return. Extreme
care should be taken when using this MMC. If the system is restarted, all voice/data
connections are dropped. If memory is cleared, all customer data is deleted and the
system returns to defaulted status. When memory is cleared, MMC 830 IP address
information is still retained. IMPORTANT: See Section 1.4 DEFAULTING THE
SYSTEM.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
ACTION DISPLAY
1. Press TRANSFER 811.
Display shows.
SYSTEM RESTART
RESET SYSTEM?NO
2. Press UP or DOWN key to make selection.
After selection is made, press RIGHT
SYSTEM RESTART
CLEAR MEMORY?NO
soft key to move cursor to YES/NO option.
3. Press UP or DOWN key to make selection
and press RIGHT soft key.
SYSTEM RESTART
CLEAR MEMORY?YES
4. Press UP or DOWN key to make selection
and press RIGHT soft key.
SYSTEM RESTART
ARE YOU SURE?YES
This erases all data in the system
5. System will return with default time and
date and default extension number
OR If system just restarted, it will return to
normal programmed status.
DEFAULT DATA: NONE
RELATED ITEMS: NONE
To Next Page
Loading...
Need help?
General
