OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 515 ASSIGN DAYLIGHT SAVINGS DATES
DESCRIPTION:
Allows the Technician to program the start dates and end dates of daylight saving
time on a system for the current year and the next 9 years. System will automatically
add 1 hour to the system clock at 02.00 (2.00 am) on the Start date and subtract 1
hour from the system clock at 02.00 (2.00 am) on the End date.
The US starts daylight savings time on the first Sunday in April and ends on the last
Sunday in October.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
TRANSFER Used to store and exit programming
ACTION DISPLAY
1. Press TRANSFER 515.
Display shows.
NO:YY:START:END
01:13:0407 :1027
2. Press UP or DOWN key to select
entry 01 to 10, eg. 05.
NO:YY:START:END
05:17:0407 :1027
3. Press RIGHT soft key to enter the year in a 2
digit format eg: 08 for 2008. The cursor
NO:YY:START:END
05:08:0407 :1027
moves to the START field.
4. Using the keypad, enter the start date in
format MMDD. The cursor moves to the
NO:YY:START:END
05:08:0428 :1027
END field eg. 0428 (April 28).
5. Using the keypad enter the END date in
format MMDD, e.g. 1027, (October 27).
NO:YY:START:END
05:08:0428 :1027
6. Repeat steps 2 to 5 for each year in
sequence.
7. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to
next MMC.
To Next Page
Loading...
