Samsung OFFICESERV 7100 - MMC: 211 DOOR RING ASSIGNMENT

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 211 DOOR RING ASSIGNMENT
DESCRIPTION:
Designates which station or group of stations will ring when a door box button is
pressed. If the ring plan destinations are not input the default ring plan 1 is used.
Available Ring Plan inputs are 1 through 6.
DEVICE DEFAULT DN
3 Digit Station 201–2xx, 301–3xx
3 Digit Station group 500–5xx
4 Digit Station 2001–20xx
4 Digit Station group 5001–50xx
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Clears previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 211
Display shows first door phone
[229] DOOR RING
1:500 2:500
2. Dial door phone number (e.g., 230)
OR
[230] DOOR RING
1:500 2:500
Press UP or DOWN to scroll through door
phone numbers and use the RIGHT soft key
to move cursor
OR
Press ANS/RLS to select ALL door ring.
ALL] DOOR RING
1:500 2:500
Home Page
Table of Contents