OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 MAY 2009
MMC: 502 STATION-WIDE TIMERS
DESCRIPTION:
Allows certain station timer values to be changed on a per-station basis or for all
stations.
1 NO ANS FWD This timer controls how long the station will ring before
Forward on No Answer takes place. (Range: 001- 250 sec.)
2 DTMF DUR. This timer governs the duration of DTMF digits which are
transmitted to an external VM system port. This can be used
when a VMS system fails to recognize the default DTMF
digit duration being transmitted from the DCS SLT port.
(Range: 100- 9900 m sec.)
3 F - DGT DELY This timer will be valuable for the system administrator to
insert a suitable delay before generating DTMF digits for In
Band Integration. (Range: 00- 9900 m sec)
4. OFFHK SEL This timer controls the grace period before placing an
internal/external call as programmed in MMC 306. (Range:
000- 250 sec.)
5. EFWD DELAY This timer controls how long a station will ring before the call
is forwarded to an external number. (Range: 000 – 250 sec.)
6. CC RNG DLY When the station does not answer incoming call within this
time, other stations with the CC key of that station will ring
together. This feature only applies to the station call and
station group call does not serviced (Range: 10 sec)
7. PING RING When this station is a member of a Pickup Group in MMC
302 and the system PING RING option is set to YES in
MMC 861 this timer will control the duration a call should
ring at this station before other stations receive ringing. A
setting of 000 means Ping ringing will occur immediately.
The default setting of 255 means no Ping ringing will occur.
The maximum programmable value for this timer is 250
seconds. 255 can only be set from the Installation Tool by
deleting the value and saving.
To Next Page
Loading...
