Samsung OFFICESERV 7100 - MMC: 725 SMDR OPTIONS

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 725 SMDR OPTIONS
DESCRIPTION:
Allows the system administrator to select the information printed on the SMDR report.
The following options may be selected to print on SMDR:
00. PAGE HEADER This option determines whether a page header will print at
the top of each page. This would normally be turned off if
SMDR is being sent to a Call Accounting machine.
01. LINE PER PAGE This option selects the length of each page to determine
when to print the SMDR header. The number of lines may
be in the range 01–99.
02. INCOMING CALL This option determines whether incoming calls will print
on SMDR.
03. OUTGOING CALL This option determines whether outgoing calls will print
on SMDR.
04. AUTHORIZE CODE This option determines whether authorization codes will
print on SMDR.
05. SMDR START TIME This option determines whether valid calls will include the
minimum call time in total call duration.
06. IN/OUT GROUP This option allows a message, IN GROUP or OUT GROUP,
to be printed in the digits dialed column each time a
station enters or leaves a group.
07. DND CALL This option allows a message, IN DND or OUT DND, to be
printed in the digits dialed column each time a station
enters or leaves DND.
08. WAKE-UP CALL This option determines whether stations receiving an
alarm reminder call will print on SMDR.
09. DIRECTORY NAME This option allows the system administrator to enter a 16
character name which will appear on the SMDR header.
Home Page
Table of Contents