OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 111 KEYSET RING TONE
DESCRIPTION:
Allows the system administrator or technician to select the ring tone heard at each
keyset. There are eight ring tones available at each keyset. A short tone burst of the
selection will be heard when the dial keypad is pressed.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 111
Display shows
[201] RING TONE
SELECTION 5
2. Dial keyset number (e.g., 205)
OR
[205] RING TONE
SELECTION 5
Press UP or DOWN to select station and
press RIGHT soft key to move cursor
OR
Press ANS/RLS to select ALL.
[ALL] RING TONE
SELECTION ?
3. Dial 1~8 to select ring tone
OR
[205] RING TONE
SELECTION 5
Press UP or DOWN to select ring tone and
press RIGHT soft key to move cursor.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to
next MMC.
DEFAULT DATA: FREQUENCY 5
RELATED ITEMS: MMC 114 KEYSET VOLUME