OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 5 APRIL 2007
5.3.48
Open Block Table Port
DESCRIPTION:
The OfficeServ 7100 automated attendant and voicemail are programmed with a
series of programming object called blocks. The Port block represents a model
of the physical automated attendant / voicemail port. It controls aspects such as
system signaling and call setup settings. Most settings in the Port block have
been defaulted for the OfficeServ 7100 to operate properly and should not be
adjusted. Such fields are denoted with a description of (DO NOT ADJUST).
Changing these fields will result in improper operation of the automated
attendant and voicemail systems.
SELECTION SCREEN:
To edit a block click the Label Name.
To Next Page
Loading...
Need help?
General
