Samsung OFFICESERV 7100 - MMC: 304 STATION;TRUNK USE

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 304 STATION/TRUNK USE
DESCRIPTION:
This MMC defines which station use groups (defined in MMC 614) can access or
answer which trunk use groups. If a station use group is set to NO Dial, members of
that station use group will not have the ability to place a call. If the station use group is
set to NO Answer, members of that station use group cannot answer an incoming
call.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 304
Display shows
[001] USE [301]
DIAL:YES ANS:YES
2. Dial the station use group number (e.g., 005)
OR
[005] USE [301]
DIAL:YES ANS:YES
Press UP or DOWN key to select station use
group and press RIGHT soft key.
3. Dial the trunk use group number (e.g., 304)
OR
[005] USE [304]
DIAL:YES ANS:YES
Press UP or DOWN key to select trunk and
press RIGHT soft key.
4. Press UP or DOWN key to select YES/NO
option
[005] USE [304]
DIAL:NO ANS:YES
OR
Dial 1 for YES or 0 for NO and press RIGHT
soft key to move cursor to ANS option.
Home Page
Table of Contents