OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 JANUARY 2009
MMC: 119 CALLER ID / ANI DISPLAY
DESCRIPTION:
Allows the technician to set the individual station display preference on a per station
basis. Caller ID, ANI and ISDN CLI can be selected to either show the name,
number first, or no display depending on the type of call. Caller ID, ANI and ISDN
CLI displays have the following options:
0. NO DISPLAY No Caller ID, ANI or CLI data will be displayed.
1. NUMBER FIRST The Caller ID, ANI or CLI number received from the Central
Office will be displayed first.
2. NAME FIRST The Caller ID name received will be displayed first. In the
case of ANI or CLI the number must be programmed in the
CID/ANI translation table (MMC 728). ANI does not provide
names.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SPEAKER Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 119
Display shows first station
[201] CID DISP
NUMBER FIRST
2. Enter station number (e.g., 205)
OR
[205] CID DISP
NUMBER FIRST
Press UP or DOWN to scroll through
stations and press the RIGHT soft key
to select a station
OR
Press ANS/RLS to select ALL and press the
RIGHT soft key.
To Next Page
Loading...
