OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 424 CARD RESTART
DESCRIPTION:
This MMC is used to restart a PRI card at the card level. This action is required to
update the processor on the PRI card to any changes in the card setup MMC’s and
to put these changes into effect.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 424
Display shows first PRI circuit
[7025] RESTART
CARD RESTART?NO
2. Dial first trunk on PRI card
(e.g., 7133)
[7133] RESTART
CARD RESTART?NO
OR
Press UP or DOWN key to select the first
trunk and press RIGHT soft key to move the
cursor.
3. Dial 1 for YES
OR
[7133] RESTART
CARD RESTART?YES
Dial 0 for NO.
Pressing 1 or 0 will advance to step 4.
4. Dial 1 for YES
OR
[7133] RESTART
ARE YOU SURE?YES
Dial 0 for NO.
Pressing 1 or 0 will return to step 2.
5. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
To Next Page
Loading...
