OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 612 ALLOW GROUP CONFERENCE
DESCRIPTION:
This program allows an ITP5112L keyset or OfficeServ Softphone user to use the
Group conference call feature. Up to 24 stations can be allowed in the system. Each
user can have up to 5 pre-programmed conferences of up to four other members
plus their own station.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear entry
TRANSFER To exit programming
ACTION DISPLAY
1. Press TRANSFER 612.
Display shows.
[201] CONF STN
NOT USED:100 FREE
2. Enter the number of a station
OR
[202] CONF STN
NOT USED :100 FREE
Press VOLUME to select the number of a
station.
Press RIGHT soft button to move the cursor.
3. Specify whether a group conference can
be used or not. A message, “NOT USED”
[205] CONF STN
USED
”will be displayed on LCD if the maximum
number of the station used for a
simultaneous conference call is exceeded.
4. Press TRANSFER to exit the program
OR
Press SPEAKER to move on to the next
program.
DEFAULT DATA: ITP5112L sets are automatically set for USED
RELATED ITEMS: MMC 118 CONFERENCE GROUP
To Next Page
Loading...
