OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 510 SLI RING CADENCE
DESCRIPTION:
Provides the ability to customize the receiving ring cadence for single line ports on a
system-wide basis. There are 5 cadences available. Please call Technical Support
before changing any cadences as some peripheral systems may require default
settings.
CADENCE NAME DESCRIPTION
1:STN RING This is the cadence incoming intercom calls will ring at.
2:TRK RING This is the cadence incoming trunk calls will ring at.
3:DOOR RING This is the cadence incoming doorphone calls will ring at.
4:ALM RING This is the cadence incoming alarm reminder calls will ring at.
5:CBK RING This is the cadence callbacks will ring at.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
ACTION DISPLAY
1. Press TRANSFER 510.
Display shows.
1:STN RING :0400
0200 0400 3000
2. Dial cadence number from above list (e.g., 3)
OR
3:DOOR RING:0400
0100 0400 2000
Press UP or DOWN key to select , press
LEFT soft key and advance to step 3.
To Next Page
Loading...
