OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 507
FEATURE KEYS
0 SUN 4 THU
1 MON 5 FRI
2 TUE 6 SAT
3 WED
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRANSFER 507.
Display shows.
RING PLAN (SUN:1)
ST:0000 END:0000
2. Dial day number (0–6, e.g., 3)
OR
RING PLAN (WED:1)
ST:0000 END:0000
Press UP or DOWN key to select day
Press RIGHT soft key to advance cursor to
step 3.
3. Dial start time for night, e.g., 1730.
If valid, cursor moves to end time.
RING PLAN (WED:1)
ST:1730 END:0800
Enter end time.
If valid, system returns to step 2
begin again.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: START: NONE END: NONE
RELATED ITEMS: MMC 211 DOOR PHONE
MMC 406 TRUNK RING
MMC 421 TRUNK COS
MMC 701 STATION COS
MMC 722 STATION KEY PROGRAMMING
MMC 723 SYSTEM KEY PROGRAMMING
MMC 512 HOLIDAY ASSIGNMENTS
To Next Page
Loading...
