OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 705 ASSIGN SYSTEM SPEED DIAL
DESCRIPTION:
Enables the assignment of system speed dialing numbers. There are up to 200
entries available for programming (see MMC 606) if SYSTEM SPEED DIAL MAX =
500 in MMC 861 or 950 available if SYSTEM SPEED DIAL MAX = 950 in MMC 861.
Each speed dial number consists of a trunk or trunk group access code followed by a
separator and up to 24 digits to be dialled. These dialed digits may consist of 0-9, 4
and #. If the system recognises a valid trunk or trunk group access number, it will
automatically insert the separator.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
B Used to insert a flash code "F"
C Used to insert a pause code "P"
D Used to insert a pulse/tone conversion code "C"
E Used to mask/unmask following digits - shows as "[" or "]"
F Used to enter name for speed dial bin (see MMC 706)
ACTION DISPLAY
1. Press TRANSFER 705.
Display shows.
SYS SPEED DIAL
500:
2. Dial speed index desired (e.g., 505)
OR
SYS SPEED DIAL
505:
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor.
3. Enter access code (e.g., 9/701) plus the
phone number up to 24 digits (digits will
SYS SPEED DIAL
505:9–121223456789
scroll under) and press RIGHT soft key to
return to step 2.
4. Press F key to toggle to MMC 706 step 3 to
enter name.
SYS SPEED NAME
505:
To Next Page
Loading...
