OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 713 LCR MODIFY DIGIT TABLE
DESCRIPTION:
This program entry is also referred to as Outdial Rules. This will give the system the
ability to add or delete a digit string or singular digit if needed to complete a call. A
perfect example is the adding of a digit “1.” An advantage is to insert a common
carrier network access code of 1010288 (ATT
®
). With these digits inserted, a long
distance call will be placed over a local line utilizing the common carrier network.
The characters 4 and # can also be entered. There are 200 modify digit entries
available.
OPTION MAXIMUM NUMBER OF DIGIT ENTRIES
Number of digits to delete 15
Insert (before dialing string) 14
Append (after dialing string) 14
DIGIT STRING KEY
Insert String + Digit String (delete) + Append String
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRANSFER 713.
Display shows.
LCR MODIFY (001)
NOF DEL DGT:00
2. Enter index number ( e.g., 005)
OR
LCR MODIFY (005)
NOF DEL DGT:00
Press UP or DOWN keys to make selection
and press RIGHT soft key to move cursor.
3. Enter number of digits to delete
OR
LCR MODIFY (005)
I:_
Press RIGHT soft key to skip step and move
cursor to next step.
To Next Page
Loading...
Need help?
General
