OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 317 TIME/COST DISPLAY OPTION
DESCRIPTION:
This MMC determines if a display keyset will show the duration of the call in
progress or the cost of the call in progress. Each station can set this option for
either TIMER or COST.
TIMER: The duration of the call in progress will show in the upper right corner of the
keyset display. The duration is in minutes and seconds. The cost of the call will not
be shown.
COST: The cost of the call in progress will show in the upper right corner of the
keyset display. The cost of the call is in dollars and cents. The duration of the call
will not be shown.
This MMC cannot be selected by the station user. It must be set by using either the
technician or customer passcode.
EXAMPLES OF KETSET DISPLAY
TIMER [701: 12:31 ]
[NEW RETRY SAVE ]
COST [701: $14.82 ]
[NEW RETRY SAVE ]
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select all
ACTION DISPLAY
1. Press TRANSFER 317
Display shows
[201] TIME / COST
DISPLAY : TIME
To Next Page
Loading...
