OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 5 APRIL 2007
5.3.2
5.3.3 Block List
The block list is used to display all available blocks and also allow users to edit or
remove blocks. To edit a block, simply click the Label Name. The checkboxes on the
left are used for deleting one or more blocks.
5.3.4 Block Creation and Removal
The block creation and removal buttons are used to create new blocks or delete
existing blocks. To delete a block or blocks check the box next to the appropriate
blocks and then click Delete. To create a new block simply click Add.
5.3.5 Block Navigation
Sometimes it may be necessary to edit many of the same block type. For instance,
after adding a new Mode block it may be necessary to update all Menu blocks to reflect
some new setting. The block navigation buttons exist to eliminate the need for a user to
constantly reload the block listing to move to another block. Instead the user can use
the block navigation keys to directly load the previous block in the block list by clicking
Prev, or to move to the next block on the block list by clicking Next.
To Next Page
Loading...
Need help?
General
