OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 JANUARY 2009
MMC: 207 ASSIGN VM/AA PORT
DESCRIPTION:
Enables SLI ports to be designated as NORMAL or VMAA. VMAA ports receive digits
designated in MMC 726 VM/AA Options and also receive a true disconnect signal
upon completion of a call. Only SLI cards, not key daughter boards, support
disconnect signal. Do not make VMAA ports data; this will return them to a single line
port and stop voice mail integration. VMAA ports have the equivalent of data protect
written in the program and are protected against tones.
NOTE: This MMC is not used to assign voice mail card ports. Voice mail card ports
are assigned as voice mail ports automatically when the OfficeServ 7100 detects a
voice mail card.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 207
Display shows
[209] VMAA PORT
NORMAL PORT
2. Dial station number (e.g., 205)
OR
[205] VMAA PORT
NORMAL PORT
Press UP or DOWN to select station
and press RIGHT soft key to move cursor.
3. Dial 1 or 0 to select port type (1=VMAA,
0=NORMAL).
[205] VMAA PORT
VMAA PORT
Press UP or DOWN to select option and
press RIGHT soft key.
To Next Page
Loading...
