OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 115 SET PROGRAMMED MESSAGE
DESCRIPTION:
Allows a display keyset user to program and set a Programmed Message at their
station. Message 00~10, 4 19-20, are pre-programmed. Each display keyset user
can create their own individual programmed messages, 11~18.
Note: The System Administrator can program and set messages for any or all
keysets by selecting the extension number first, then the message number 00~20.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 115
Display shows
[201] PGMMSG(00)
CANCEL PGM MSG
2. Dial station number (e.g., 205)
OR
[205] PGMMSG(00)
CANCEL PGM MSG
Press UP or DOWN to select station and
press RIGHT soft key to move cursor
OR
Press ANS/RLS to select ALL.
[ALL] PGMMSG(??)
3. Dial an entry number to select message
number, e.g., 05
[205] PGMMSG(05)
PAGE ME
OR
Press UP or DOWN to select message
Press RIGHT soft key to return to step 2.
To Next Page
Loading...
