OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 208 ASSIGN RING TYPE
DESCRIPTION:
Provides the flexibility to program single lines to have ICM ringing, C.O. ringing and
data secure. With the many types of external ringing devices, all configurations can
be met. All devices will also have a positive disconnect signal. Do not make VM/AA
ports data; this will return them to a single line port and stop voice mail integration.
0 ICM RING
1 CO RING
2 DATA RING
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 208
Display shows
[ 209 ] RING TYPE
ICM RING
2. Dial station number (e.g., 205)
OR
[ 205 ] RING TYPE
ICM RING
Press UP or DOWN to select station and
press RIGHT soft key to move cursor.
3. Dial 1,2 or 0 to select port type (e.g. 2)
OR
[ 205 ] RING TYPE
DATA RING
Press UP or DOWN to select option and
press LEFT or RIGHT soft key to return to
step 2 above.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
To Next Page
Loading...
