OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 117 TEXT MESSAGE
DESCRIPTION:
This program allows the user to create or modify 16 character text messages for
their personal use in response to an off-hook voice announcement (OHVA). Only
the stations set to use text messaging in MMC 611 can create and use text
messages. Each station can have up to 10 text messages.
Messages are written using the keypad. Each press of a key will select a character.
Pressing the dial pad key will move the cursor to the next position. For example, if
the directory name is “SAM SMITH” press the number “7” three times to get the
letter “S”. Now press the number “2” once to get the letter “A”. Continue selecting
characters from the table below to complete message. Pressing the “A” key will
change the letter from upper case to lower case.
NOTE: When the character you want appears on the same dial pad key as the
previous character, press the UP key to move the cursor to the right.
•
iDCS, DS and ITP KEYSETS
COUNT 1 2 3 4 5
DIAL 0 < > . ) 0
DIAL 1 space ? , ! 1
DIAL 2 A B C @ 2
DIAL 3 D E F # 3
DIAL 4 G H I $ 4
DIAL 5 J K L % 5
DIAL 6 M N O ^ 6
DIAL 7 P Q R S 7
DIAL 8 T U V
4
8
DIAL 9 W X Y Z 9
DIAL 4 : = [ ]
4
1. When the character you want appears on the same dial pad key as the previous
character, press UP to move the cursor one space to the right.
2. Other symbols are available for DIAL #.
To Next Page
Loading...
