OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 310 LCR CLASS OF SERVICE
DESCRIPTION:
Assigns the LCR class of service allowed on a per-station, per-trunk basis. There are
eight classes which may be assigned. LCR class of service allows specific users to
trunk advance up to a matching LCR class of service programmed in MMC 712.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRANSFER 310
Display shows
[201] LCR CLASS
LCR CLASS 1
2. Dial station number (e.g., 205)
OR
[205] LCR CLASS
LCR CLASS 1
Press UP or DOWN to select station and
press RIGHT soft key to move cursor
OR
Press ANS/RLS to select ALL stations.
[ALL] LCR CLASS
LCR CLASS ?
3. Dial 1–8 to select class type (e.g. 3)
OR
[205] LCR CLASS
LCR CLASS 3
Press UP or DOWN to select class type and
press RIGHT soft key to return to step 2.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to
next MMC.
To Next Page
