OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 743 AUTO RECORD
DESCRIPTION:
This MMC is only used for the Samsung embedded Voice Mail.
Some specific stations in the phone system can be assigned to automatically
record conversations. When this option is set, all incoming, all outgoing, or all calls
(incoming or outgoing) can be recorded.
When this option is selected a specific port should be assigned for each station set
to automatic conversation recording or the effectiveness of this feature cannot be
guaranteed.
In this MMC you can assign:
1. Which stations use this feature. – Station number
2. What mailbox the conversation is recorded in. – Mailbox number
3. What type of conversations are recorded, in, out or both. – I, O or B
4. What port is dedicated to the station. – Voice mail port number
The maximum number of stations assigned the AUTO RECORD feature is limited to
the maximum number of voicemail ports. Each station using AUTO RECORD
depletes Voice Mail/Auto Attendant ports by one.
The same port cannot be assigned to more than one station. Attempts to do this will
result in an error message.
When a Voice Mail port is assigned here, it is automatically removed from the Voice
Mail group (519) defined in MMC 601.
WARNING
: Before using this feature make sure that you are not violating any state
or federal laws. Some states require that the recorded party be notified. SAMSUNG
is not responsible for any illegal use of this feature.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to delete an entry
To Next Page
Loading...
