OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 729 RATE CALCULATION TABLE
DESCRIPTION:
The RATE CALCULATION TABLE is used to define the billing charges for each
COST RATE. These rate tables correlate with the Trunk Cost Rate and the Costing
Dial Plan. There are eight call costing rates. Each rate has the following data fields.
FIRST INTERVAL DURATION: This is the amount of time at the beginning of each
call to which a fixed cost is applied. The range is from 0 to 999 seconds, for
example, 180 seconds (three minutes).
FIRST INTERVAL COST: This is the dollar cost for the first interval duration. The
range is from 0 to 999, for example, 345 ($3.45).
SECOND INTERVAL DURATION: This is the amount of time for the duration of each
billing increment after the first interval has expired. The range is from 0 to 999
seconds, for example, 006 seconds (six seconds).
SECOND INTERVAL COST: This is the dollar cost for each billing increment. The
range is from 0 to 999, for example 100 ($1.00).
SURCHARGE: This is a one-time charge that is applied to the call over and above
the time charges. The range is from 0 to 999, for example 150 ($1.50).
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select all
ACTION DISPLAY
1. Press TRANSFER 729.
Display shows COST RATE and FIRST
COST RATE [1]
1ST DUR:000
INTERVAL DURATION.
To Next Page
Loading...
