Samsung OFFICESERV 7100 - Page 338

OfficeServ 7100 PROGRAMMING
TECHNICAL MANUAL PART 2 APRIL 2007
MMC: 729
2. Dial COST RATE number (e.g., 03)
OR
COST RATE [3]
1ST DUR:000
Press UP or DOWN to select COST RATE.
Press right soft key to move cursor
OR
Press ANS/RLS for ALL.
3. Enter FIRST INTERVAL DURATION in
seconds, e.g., 060 (one minute) using the
COST RATE [03]
1ST DUR:060
keypad and press UP to advance.
4. Enter FIRST INTERVAL COST in cents,
e.g., 125 ($1.25) using the keypad and
COST RATE [03]
1ST COST :125
press UP to advance.
5. Enter SECOND INTERVAL DURATION in
seconds, e.g., 006 (six seconds) using the
COST RATE [03]
2ND DUR:006
keypad and press UP to advance.
6. Enter SECOND INTERVAL COST in cents,
e.g., 030 ($0.30) using the keypad and
COST RATE [03]
2ND COST:030
press UP to advance.
7. Enter SURCHARGE in cents, e.g., 100
($1.00).
COST RATE [03]
SURCHARGE: 100
8. Press TRANSFER to store and exit.
DEFAULT DATA: ALL COST RATES NO DATA
RELATED ITEMS: MMC 317 CALL COST DISPLAY OPTION
MMC 422 TRUNK COST RATE
MMC 730 COSTING DIAL PLAN
Home Page
Table of Contents